What Grease To Use On Dropper Post. Greasing the post means you will have to tighten the. if your dust wiper in the mid cap is dirty and dry, be sure to take a little extra care to clean it up nicely, then massage some grease. dropper posts can bind or move slowly of the seatclamp is too tight. Using your finger, apply grease to the area around the guide pins (10), the bushings (9,11) on the upper tube (7) and inside the top of the lower tube (12). Grease the rubber seal on the cartridge and refit it to the upper tube the same way it came out. stay away from degreasers or penetrating oil as they will strip out the factory grease from the wiper seal and reduce its. Compress dropper & loosen mid cap. this should take 5 mins or less and can be done with your dropper post on your bike. keeping you upper bushing (10) and dust wiper (9) clean and greased will greatly prolong the life of your dropper.
from airbornebicycles.com
stay away from degreasers or penetrating oil as they will strip out the factory grease from the wiper seal and reduce its. this should take 5 mins or less and can be done with your dropper post on your bike. keeping you upper bushing (10) and dust wiper (9) clean and greased will greatly prolong the life of your dropper. dropper posts can bind or move slowly of the seatclamp is too tight. if your dust wiper in the mid cap is dirty and dry, be sure to take a little extra care to clean it up nicely, then massage some grease. Greasing the post means you will have to tighten the. Grease the rubber seal on the cartridge and refit it to the upper tube the same way it came out. Compress dropper & loosen mid cap. Using your finger, apply grease to the area around the guide pins (10), the bushings (9,11) on the upper tube (7) and inside the top of the lower tube (12).
Airborne Bicycles HowTo Plague + Toxin Dropper Post Installation
What Grease To Use On Dropper Post keeping you upper bushing (10) and dust wiper (9) clean and greased will greatly prolong the life of your dropper. dropper posts can bind or move slowly of the seatclamp is too tight. this should take 5 mins or less and can be done with your dropper post on your bike. Grease the rubber seal on the cartridge and refit it to the upper tube the same way it came out. if your dust wiper in the mid cap is dirty and dry, be sure to take a little extra care to clean it up nicely, then massage some grease. stay away from degreasers or penetrating oil as they will strip out the factory grease from the wiper seal and reduce its. Compress dropper & loosen mid cap. Using your finger, apply grease to the area around the guide pins (10), the bushings (9,11) on the upper tube (7) and inside the top of the lower tube (12). Greasing the post means you will have to tighten the. keeping you upper bushing (10) and dust wiper (9) clean and greased will greatly prolong the life of your dropper.
